Determination of Pueraria Isolavone by HPLC
1) Reagents
a. Methanol (HPLC) b. Nanopure water
2) Apparatus
HPLC (Shimadzu) Analytical balance (1/10000) Ultrasonic cleaner
0.45μm PTFE filter 50ml volumetric flask Screw cap vials
3) HPLC condition
Column: Kromasil C18 5 m 4.6200mm
Detector: UV 260nm
Mobile Phase: A=water B= MeOH
Gradient:
Time(min) 0.01 52 54 58 60
%A 83 64 64 83 83
%B 17 36 36 17 17
Flow Rate: 1.0ml/min
Injection: 10μl
4) Procedure
Samples Preparation
Accurately weigh 25mg extraction into 50ml volumetric flask. Add MeOH to volume and sonicate to mix, filter through a 0.45 μm PTFE filter into a screw cap vial and proceed with the analysis.
Standard preparation /calibration
Prepare a mixed standard solution (approximately 0.5mg/ml in MeOH) using a commercial reference standard of Pueraria Isoflavone,Sonicate for about 10 minutes and transfer to screw-cap vials and can be stored in the refrigeration.
5) Calculation
Determine the peak areas of the Pueraria Isoflavone on the sample chromatogram and compare to the corresponding peaks in the chromatogram for the reference standard solution. Calculate the weight percent.